Heating and cooling your home uses more energy and drains more energy dollars than any other system in your home. Typically, 46% of your utility bill goes for heating and cooling. No matter what kind of heating, ventilation, and air-conditioning you have in your house, you can save money and increase your comfort by properly maintaining and upgrading your equipment. But, remember, an energy -efficient furnace alone will not have as great an impact on your energy bills as using the whole house approach. By combining proper equipment maintenance and upgrades with appropriate insulation, air sealing, and thermostat settings, you can cut your energy use for heating and cooling, and reduce environmental emissions, from 20% to 50%.
Heating and Cooling Tips
*Set your Thermostat as low a is comfortable in the winter and as high as is comfortable in the summer.
*Clean or replace filters on furnaces once a month or as needed
*Clean warm air registers, baseboard heaters, and radiators as needed;make sure they're not blocked by furniture, carpeting , or drapes.
*Bleed trapped air from hot water radiators once or twice a season if in doubt about how to preform this tasks, call a professional.
*Place heat-resistant radiator reflectors between exterior walls and the radiators.
*Turn off kitchen, bath and other exhaust fans within 20 minutes after you are done cooking or bathing;when replacing exhaust fans consider installing high-efficiencies, low-noise models.
*During the heating season, keep the draperies and shades on your south facing windows open during the day to allow sunlight to enter your home and closed at night to reduce the chill you may feel from cold windows.
*During the cooling season, keep the window coverings closed during the day to prevent soar gain. (U.S.Department of Energy)